What To Do If There Is No Hot Water
What To Do If There Is No Hot Water
Blog Article
Right here in the next paragraph you'll find lots of helpful answers when it comes to No Hot Water — Water Heater Repair.
Lots of contemporary houses utilize an electric water heater for their heating system, due to its benefit as well as simplicity of use. Nevertheless, much like any other electrical appliances, troubles might develop with its use, unexpectedly. It can be truly aggravating to wake up to a cool shower instead of a warm one or having your bath with water that isn't hot sufficient and even too warm. Whatever the instance might be, hot water heater troubles can be rather nerve-racking. The good news is, we've made a list of feasible services to your water heater concerns. There are a number of variables that can trigger a lot of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you turn off the major power supply for security. Whatever the trouble is, getting it taken care of should not present too much of a concern if you follow these actions:
Call A Professional:
If after changing all faulty components and resetting your temperature level, the water heater still isn't working, you might need to speak to a professional plumber for a specialist viewpoint. The trouble with your heating unit could be that the cold and hot taps have actually been switched or it might be undersized for the quantity of hot water required in your home. Whatever the situation may be, an expert plumber would help fix the problem.
Check Your Power Supply:
As fundamental as this might seem, it is very required. Without appropriate power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the breaker is the issue, just transform it off and on once again. Change any kind of damaged or damaged fuse. Examine the appliance with power after these modifications to see if it's currently working.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot enough, you might require to check the temperature settings on your top thermostat. Make certain the circuit breaker is switched off before doing anything. Open up the accessibility panel and also press the red button for temperature reset above the thermostat. This must aid warm the water. Turn the circuit breaker back on as well as inspect if the trouble has actually been resolved.
Check the Heating Element in the Hot Water Heater:
If it's not a power issue, after that attempt checking out your heating element if it is still working. Evaluate each of your heating elements to make sure the trouble isn't with any one of them. If any one of them is malfunctioning, change that component and afterwards examine whether the warm water is back on.
Verdict
Hot water heater troubles are not always major. Many of them are due to minor issues like a blown fuse or worn-out heating element. Replacing the faulty parts should do the trick. However, if you are still unable to resolve the problem, give a call to your closest plumber to come to get it fixed.
8 possible reasons why you have no Hot Water
Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.
Water Leak
Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.
Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.
Gas Heater: Gas Leak
If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.
Gas Heater: Pilot Light Problems
There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.
Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.
Gas Heater: Faulty Thermocouple
The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.
Electric Heater: Breaker Blues
Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.
Electric Heater: Reaching The Limit
If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.
Electric Heater: Heating Element
If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.
https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/
I hope you enjoyed our section about What Would Cause My Electric Water Heater to Stop Working?. Thank you for taking a few minutes to read our blog. Sharing is caring. Who knows, you will be doing someone a favor. Kudos for your time. Kindly check up our blog back soon.
Get Quote Now
Report this page